Mobile chipper TAC-710
- Details
- Category: materials
Mobile chipper TAC-710 from the company TEREX Environmental Equipment (USA), is designed for processing wood waste (branches, bushes, vershinki, Christmas trees) maximum diameter of 229 mm. The machine is located on its own landing gear (wheels 185/80 R14) and is equipped with a towbar for the transportation of vehicles (SUVs, tractors, trucks). The chassis is equipped with a brake system and the rear light signaling. The machine frame is made of channel 101.6 mm. Tow hitch is equipped with a mechanical jack.
Submission of material to the chipper knives made through the guide feeder with hydraulic top (diameter 305 mm) roller, pressed down and force feed material for grinding. The machine is equipped with its own hydraulic system (oil tank, hydraulic pump). System volume - 54 liters.
Recycling mother in chips, made four blades mounted on a disc diameter of 940 mm. Chipping knives have one side chopping. Anvil has two working faces. Release of chips produced through outlet tube rotating na360 °. The throw chips regulated valve on the output tube. Adjusting the pipes and valves - mechanical.
TAC-710 is equipped with an automatic control system feeder, which is a feedback system (engine speed - the rotation of the drive roller). In the fall of revolutions of the drive motor - feed roller stops automatically until normal engine speed. Direction control of the feed roller (forward, stop, reverse, emergency stop) displayed the same way on the handle, which is located at the end of the supply feeder.
On the outside is dosed installed safety switches (one on each side) to allow instantaneous stop the machine in an emergency situation. The machine is provided with foldable end feed which is raised to the upper position during transport and reduces the length of the machine to 3.46 meters. At the end of the handle feed is controlling the direction of rotation of the supply module is equipped with rolika.Stanok rear light signaling. Battery - 12 is in the closed metal box.
- The drive motor Kohler Command Pro (38 hp)
- The warranty for chipper - 1 year.
Источник: http://www.workwebsite.ru/joomla/plugins/allvideos.html
|
model |
disk |
|
Download window before the knives (at the output feed hopper) (height * width) |
229 x 305 mm |
|
Window loading inlet feed hopper (height * width) |
560 х 965 mm |
|
length chips |
-- mm |
|
The thickness of the chip |
-- mm |
|
Number of blades on the disk |
4 knives (one working face) |
|
The dimensions of the blades (dl. * Br. * Thick.) |
183*102*9,5 mm |
|
anvil horizontal |
1 piece (two working faces) |
|
chipper disc |
Diameter: 940 mm, thickness 32 mm |
|
The diameter of the shaft |
51 mm |
|
The rotational speed of the disc |
1132 rev / min |
|
performance |
to -- t/h |
|
feed system |
The upper feed roller diameter 311 mm, length 305 mm |
|
Automatic feeding system |
No Stress |
|
The feed rate of material |
46 m / min. (Fixed) |
|
hydraulic system |
Drive from the gear pump with a mechanical valve |
|
Power installed engines |
Kohler Command Pro 38 hp (petrol) |
|
fuel tank |
45 l |
|
oil tank |
45 l |
|
Exhaust pipe for chips |
360 ° rotation with adjustable damper for chips |
|
jack reference |
Mechanical, length 381 mm |
|
Tow hitch type "ball" with adjustable |
22 – 51 mm |
|
safety chains |
Thickness - 6.4 mm, length - 762 mm |
|
Landing Gear |
Torflex load 1587 kg, power brakes |
|
bus |
185/80 R14 (2 pcs) |
|
Machine dimensions (length * width * height) |
4,97*2,34*1,63 m |
|
Dimensions of the machine transport (length * width * height) |
3,46*2,34*1,63 m |
|
machine weight |
1270 kg |
