Mobile chipper TAC-770
- Details
- Category: materials
Mobile chipper TAC-770 from the company TEREX Environmental Equipment (USA), is designed for processing wood waste (branches, bushes, vershinki, Christmas trees) maximum diameter of 482 mm. The machine is located on its own landing gear (wheels 265/75 R17,5) and is equipped with a towbar for the transportation of vehicles (tractors, trucks). The chassis is equipped with a brake system and the rear light signaling. The machine frame is made of channel 6 mm thick. Tow hitch adjustable in height and length (option) and is equipped with a mechanical jack, as well as a safety chain with two hooks.
Submission of material to the chipper knives made through the guide feeder with hydraulic top (diameter 495 mm) roller, pressed down and force feed material for grinding. The upper roller can be lifted hydraulically, that allows along with a long material to process lumpy waste. Furthermore, when processing a heavy material, the operator may increase the force pressing the upper roller material. The machine is equipped with its own hydraulic system (oil tank, hydraulic pump). System volume - 87 liters.
Recycling mother in chips, made four blades (two in each cutter knife pocket), mounted on the drum diameter of 939 mm. The length of one chipper pocket is 609 mm. Chipping knives have two chopping hand. Anvil has four working faces.
Release of chips produced through outlet tube, rotating 300 °. The throw chips regulated valve on the output tube. Adjusting the pipes and valves - mechanical. The pipe has an openable bottom for possible inspection.
TAC-770 is equipped with an automatic control system feeder, which is a feedback system (engine speed - the rotation of the drive roller). In the fall of revolutions of the drive motor - feed roller stops automatically until normal engine speed. Direction control of the feed roller (forward, stop, reverse, emergency stop) displayed the same way on the handle, which is located at the end of the supply feeder.
On the outside is dosed installed safety switches (one on each side) to allow instantaneous stop the machine in an emergency situation. The machine is equipped with a folding butt supply, which rises to the top position during transport and reduces the length of the machine to 5.49 m. The engine control unit is equipped with a digital display, which displays the fuel level indicators, hours of operation, voltage, temperature of the surrounding liquid, oil pressure, engine speed. The system automatically turns off the engine when: engine overheating; low oil pressure, low fuel pressure. Battery - 12V is in the closed metal box. Chopper is equipped with a lockable tool box.
- The drive motor John Deer Power tech E 6.8 L (200 hp)
- The warranty for chipper - 1 year.
Options for TAC 770:
-
Two-speed tracked chassis with rubber tracks controlled by a multi-function wireless remote control unit
CUMMINS QSB 4.5 (160 hp)
JOHN DEER 4.5N (140 hp)
Clutch PT TECH HPT80T (80-170 hp)
Clutch PT TECH HPT010T (170-250 hp)
Precleaner
An enhanced system feed (increase inlet to 457h609 mm)
Handle height adjustment pin tube chip
Hydraulic rotation output pipes for chips
Limit switch on the door for access to the engine
Radiator protection
Hydraulic speed control feed roller
Prtivootkatov holder (2 pieces)
Protivootkatov holder (2 pieces) and the rubber wheel chock (2 items)
Cone holder
Holders flags
Overall whips
Tool box (steel)
Front hydraulic support leg
Fenders
Spare wheel 235/75 R17,5
Dual chassis load capacity on each axle 3175 kg
Spare wheel
Set of keys for replacement blades
Flashing beacons
Protection block rear light signaling LEXON
Hydraulic winch (including cable 36 meters)
Источник: http://www.workwebsite.ru/joomla/plugins/allvideos.html
|
model |
tympanic |
|
Download window before the knives (at the output feed hopper) (height * width) |
482 х 609 mm |
|
Window loading inlet feed hopper (height * width) |
914 х 1625 mm |
|
length chips |
-- mm |
|
The thickness of the chip |
-- mm |
|
Number of knives on the drum |
4 knife (two working faces) |
|
The dimensions of the blades (dl. * Br. * Thick.) |
304*127*16 mm |
|
anvil horizontal |
1 piece (four working faces), steering |
|
Number knife pockets on the drum |
2 pcs |
|
Number of knives in the knife pocket |
2 pcs |
|
drum chipper |
Diameter: 939 mm, width 609 mm |
|
The diameter of the shaft |
74 mm (Bullet Proof) |
|
Drum speed |
1279 rev / min |
|
performance |
to -- t/h |
|
feed system |
The upper feed roller diameter 495 mm, length 609 mm |
|
Lift system and an additional clip of a material |
an upper feed roller |
|
Automatic feeding system |
No Stress reversing the material |
|
The feed rate of material |
29,8 m/m |
|
hydraulic system |
"Live" hydraulic pump with a direct drive, a modular valve block |
|
Power installed engines |
John Deer Power tech E 6.8 L 200 hp (preheater) |
|
fuel tank |
190 liters, visual level indicator, filler neck with lockable lid |
|
oil tank |
87 liters with filter, visual level indicator, filler neck with lockable lid |
|
fuel consumption |
-- l/h |
|
Exhaust pipe for chips |
Rotation 300 °, opened the lower part, adjustable dampers for chips |
|
Adjusting the height of the pipe |
in three positions |
|
jack reference |
Mechanical load capacity 4535 kg |
|
Tow hitch on the choice of the "ring" of 63 mm or type "ball" |
Type "ring" 76 mm |
|
safety chains |
Thickness - 9 mm with hooks |
|
Landing Gear |
Torflex load 4535 kg, with electric brakes and emergency stop switch |
|
bus |
235/75 R17,5 (2 pcs) |
|
Dimensions of the machine working (length * width * height) |
6,12*2,84*2,39 m |
|
Dimensions of the machine transport (length * width * height) |
5,49*2,84*2,39 m |
|
machine weight |
4082 kg |
