Mobile chipper TAC-790
- Details
- Category: materials
Mobile chipper TAC-790 from the company TEREX Environmental Equipment (USA), is designed for processing wood waste (branches, bushes, vershinki, Christmas trees) maximum diameter of 533 mm. The machine is located on its own landing gear (wheels 235/75 R16) and is equipped with a towbar for the transportation of vehicles (tractors, trucks). The chassis is equipped with a brake system and the rear light signaling. The machine frame is made of channel 6 mm thick. Tow hitch adjustable in height and length (option) and is equipped with a mechanical jack, as well as a safety chain with two hooks.
Submission of material to the chipper knives made through the guide feeder with hydraulic top (diameter 495 mm) roller, pressed down and force feed material for grinding and lower feed conveyor chain dlinoy183 cm. The upper roller can be raised hydraulically, which allows in addition to the long material process lumpy waste. Furthermore, when processing a heavy material, the operator may increase the force pressing the upper roller material. The machine is equipped with its own hydraulic system (oil tank, hydraulic pump). Volume of the system - 91 liter. Recycling mother in chips, made four blades (two in each cutter knife pocket), mounted on the drum diametrom940 mm. The length of one chipper pocket is 912 mm. Chipping knives have two chopping hand. Anvil has four working faces.
Release of chips produced through outlet tube, rotating 300 °. The throw chips regulated valve on the output tube. Adjusting the pipes and valves - mechanical. The pipe has an openable bottom for possible inspection.
TAS-790 is equipped with an automatic control system feeder, which is a feedback system (engine speed - the rotation of the drive roller). In the fall of revolutions of the drive motor - feed roller stops automatically until normal engine speed. Direction control of the feed roller (forward, stop, reverse, emergency stop) displayed the same way on the handle, which is located at the end of the supply feeder.
On the outside is dosed installed safety switches (one on each side) to allow instantaneous stop the machine in an emergency situation. The engine control unit is equipped with a digital display, which displays the fuel level indicators, hours of operation, voltage, temperature of the surrounding liquid, oil pressure, engine speed. The system automatically turns off the engine when: engine overheating; low oil pressure, low fuel pressure.
Battery - 12 is in the closed metal box. Just shredder is equipped with a lockable tool box.
The drive motor CAT Tier 3 (250 hp)
The warranty for chipper - 1 year.
Options for TAC 790:
Two-speed tracked chassis with rubber tracks controlled by a multi-function wireless remote control unit model 305 CR
Clutch PT TECH HPT010T (170-250 hp)
Clutch PT TECH HPT012TD (250-460 hp)
Precleaner
Hydraulic adjustment of valve chip
Hydraulic rotation output pipes for chips
Limit switch on the door for access to the engine - in the database
Radiator protection - in the database
Hydraulic speed control feed roller - in the database
Prtivootkatov holder (2 pieces)
Protivootkatov holder (2 pieces) and the rubber wheel chock (2 items)
Cone holder
Holders flags
Overall whips
Dual rear stabilizer
Fenders
Spare wheel 235/75 R17,5
Spare wheel
Set of keys for replacement knives - in database
Flashing beacons
Protection block rear light signaling LEXON
Hydraulic winch (including cable 36 meters)
Multi-function wireless remote control
Hydraulic manipulator (boom 457 cm) with support legs
Источник: http://www.workwebsite.ru/joomla/plugins/allvideos.html
|
model |
tympanic |
|
Download window before the knives (at the output feed hopper) (height * width) |
533 х 914 mm |
|
Window loading inlet feed hopper (height * width) |
914 х 1930 mm |
|
length chips |
около 13 mm |
|
The thickness of the chip |
около 5 mm |
|
Number of knives on the drum |
6 knives (two working faces) |
|
The dimensions of the blades (dl. * Br. * Thick.) |
304*127*16 mm |
|
anvil horizontal |
1 piece (four working faces), steering |
|
Number knife pockets on the drum |
2 pcs |
|
Number of knives in the knife pocket |
3 pcs |
|
drum chipper |
Diameter: 940 mm, width 914 mm |
|
The diameter of the shaft |
74 mm (Bullet Proof) |
|
Drum speed |
1279 rev / min |
|
performance |
to - t / h |
|
feed system |
The upper feed roller diameter 495 mm, length 914 mm |
|
Lift system and an additional clip of a material |
an upper feed roller |
|
Automatic feeding system |
No Stress reversing material |
|
The feed rate of material |
29.8 m / min |
|
hydraulic system |
"Live" hydraulic pump with a direct drive, a modular valve block |
|
Power installed engines |
CAT Tier 3 (250 hp) (preheater) |
|
fuel tank |
227 liters, visual level indicator, filler neck with lockable lid |
|
oil tank |
91 liter filter, visual level indicator, filler neck with lockable lid |
|
fuel consumption |
-- l/h |
|
Exhaust pipe for chips |
Rotation 300 °, opened the lower part, adjustable dampers for chips |
|
Adjusting the height of the pipe |
in three positions |
|
jack reference |
Mechanical load capacity 4535 kg |
|
Tow hitch on the choice of the "ring" of 63 mm or type "ball" |
Type "ring" 76 mm |
|
safety chains |
Thickness - 9 mm with hooks |
|
Landing Gear |
Torflex load 4535 kg, with electric brakes and emergency stop switch |
|
bus |
235/75 R16 (4 pcs) |
|
Dimensions of the machine working (length * width * height) |
6,35*3,38*2,56 m |
|
Dimensions of the machine transport (length * width * height) |
6,35*3,38*2,56 m |
|
machine weight |
5443 kg |
