Mobile chipper TAC-770

 

• 
• 

Mobile chipper TAC-770 from the company TEREX Environmental Equipment (USA), is designed for processing wood waste (branches, bushes, vershinki, Christmas trees) maximum diameter of 482 mm. The machine is located on its own landing gear (wheels 265/75 R17,5) and is equipped with a towbar for the transportation of vehicles (tractors, trucks). The chassis is equipped with a brake system and the rear light signaling. The machine frame is made of channel 6 mm thick. Tow hitch adjustable in height and length (option) and is equipped with a mechanical jack, as well as a safety chain with two hooks.

Submission of material to the chipper knives made through the guide feeder with hydraulic top (diameter 495 mm) roller, pressed down and force feed material for grinding. The upper roller can be lifted hydraulically, that allows along with a long material to process lumpy waste. Furthermore, when processing a heavy material, the operator may increase the force pressing the upper roller material. The machine is equipped with its own hydraulic system (oil tank, hydraulic pump). System volume - 87 liters.

Recycling mother in chips, made four blades (two in each cutter knife pocket), mounted on the drum diameter of 939 mm. The length of one chipper pocket is 609 mm. Chipping knives have two chopping hand. Anvil has four working faces.

Release of chips produced through outlet tube, rotating 300 °. The throw chips regulated valve on the output tube. Adjusting the pipes and valves - mechanical. The pipe has an openable bottom for possible inspection.

TAC-770 is equipped with an automatic control system feeder, which is a feedback system (engine speed - the rotation of the drive roller). In the fall of revolutions of the drive motor - feed roller stops automatically until normal engine speed. Direction control of the feed roller (forward, stop, reverse, emergency stop) displayed the same way on the handle, which is located at the end of the supply feeder.

On the outside is dosed installed safety switches (one on each side) to allow instantaneous stop the machine in an emergency situation. The machine is equipped with a folding butt supply, which rises to the top position during transport and reduces the length of the machine to 5.49 m. The engine control unit is equipped with a digital display, which displays the fuel level indicators, hours of operation, voltage, temperature of the surrounding liquid, oil pressure, engine speed. The system automatically turns off the engine when: engine overheating; low oil pressure, low fuel pressure. Battery - 12V is in the closed metal box. Chopper is equipped with a lockable tool box.

• The drive motor John Deer Power tech E 6.8 L (200 hp)
• The warranty for chipper - 1 year.

Options for TAC 770:

• Two-speed tracked chassis with rubber tracks controlled by a multi-function wireless remote control unit
  CUMMINS QSB 4.5 (160 hp)
  JOHN DEER 4.5N (140 hp)
  Clutch PT TECH HPT80T (80-170 hp)
  Clutch PT TECH HPT010T (170-250 hp)
  Precleaner
  An enhanced system feed (increase inlet to 457h609 mm)
  Handle height adjustment pin tube chip
  Hydraulic rotation output pipes for chips
  Limit switch on the door for access to the engine
  Radiator protection
  Hydraulic speed control feed roller
  Prtivootkatov holder (2 pieces)
  Protivootkatov holder (2 pieces) and the rubber wheel chock (2 items)
  Cone holder
  Holders flags
  Overall whips
  Tool box (steel)
  Front hydraulic support leg
  Fenders
  Spare wheel 235/75 R17,5
  Dual chassis load capacity on each axle 3175 kg
  Spare wheel
  Set of keys for replacement blades
  Flashing beacons
  Protection block rear light signaling LEXON
  Hydraulic winch (including cable 36 meters)


Источник: http://www.workwebsite.ru/joomla/plugins/allvideos.html